2011 John Deere 825 Gator fuel filter replacement

The JD Workmen · May 12, 2014

Hello, Does anyone know how to release these fuel line clamps that are posted above the first pic shows the top side of it. Thanks for the help

The JD Workmen · May 12, 2014

Bottom side of clamp

Bob · May 12, 2014

Ford used a lot of these.

Simply pull the black clip out of the white fitting.

Blackhole49 · May 12, 2014

Go to an auto parts. They make a special tool for those type of clamps on cars. It should be the same. If there old enough, don't be suprised if the keepers brake coming out.

Bob · May 12, 2014

Black, he doesn't need a tool for the simple black clip.

The disconnect tools are for fittings with "garter springs" or steel locking tabs.

GreenAcres · May 12, 2014

Have had quite a few of these in the shop, just push the black tab in and pull the hose off, you may need to push it together slightly to take tension off the clip. Also note that that line will have pressure in it so hold a rag over the fitting you don"t get a face full of gas. You will likely break the clip if you try to remove it like others said.
Luke

2011 John Deere 825 Gator fuel filter replacement

The JD Workmen

Member

The JD Workmen

Member

Bob

Well-known Member

Blackhole49

Well-known Member

Bob

Well-known Member

GreenAcres

Member

Similar threads