Inverted flare nuts

scott weaver · May 3, 2014

Can anyone tell me where I can buy inverted flare nuts for my MF35? I am looking for 1/2-20 for 1/4" line. Its used on the fuel system. All I can find for 1/4" line is 1/4 or 5/16 thread. Thanks.

M-MAN · May 3, 2014

It would probably be easier to get a 1/2 to 1/4 reducer from napa and use a 1/4 flare on it.

NCWayne · May 3, 2014

McMaster Carr and MCS both have a pretty good selection. That said it looks like McMaster haa a 1/4 inverted flare nut that is a 7/16x24 thread. That"s the closest I could find to what your looking for. That said, just do a search for 1/2 x 20 inverted flare nut and it will bring up quite a few places that carry the fittings. Maybe one of them will have what your looking for, but they tend to be a pretty standard sized item, so you might just have something odd that will wind up being a factory only item. Personlly I"ve never seen anything but the standard stuff, but I learned long ago that when you think you"ve seen it all, something new will always pop up. Hey, I discovered when I was looking around that they even have the inverted flare fittings in metric now too. Learn something new every day.....LOL Good luck.

Inverted flare nuts

scott weaver

Member

M-MAN

Well-known Member

NCWayne

Well-known Member

Similar threads