IS IH 1066 TO BIG FOR NH 355 GRINDER MIXER

GHMALLARD · Mar 25, 2014

WONDERING IF A IH 1066 IS TO BIG OF A TRACTOR TO RUN A NH 355 GRINDER MIXER / IS IT A GOOD DISCING TRACTOR

caterpillar guy · Mar 25, 2014

If your working on steep hills it would work fine. Since the weight is al on the grinder wheels. We run an old NH350, with anything from an H to a 1466. Just depends on what is there when we need it.
Yes a 1066 would be a good discing tractor or any field work.

GHMALLARD · Mar 25, 2014

GUESS IM WONDERING IF A 1066 HAS TO MUCH PTO HP TO RUN NH 355 GRINDER MIXER TO GRIND CORN

jon f mn · Mar 25, 2014

Would be about perfect for the job.

Anonymous-0 · Mar 25, 2014

Just curious what you are smoking to think he will be pulling his grinder up hills?

RodinNS · Mar 25, 2014

Should be good match. There's a class 6 power line on the 355 so it should stand up to a 1066 OK.

Rod

Bradiniowa · Mar 25, 2014

We run one from 666 to JD 7810. Just make sure rpms are down when you engage pto.

the tractor vet · Mar 25, 2014

We run anything from my S/MTA on up to the 1066 that is turned up . The S/MTA runs it good ya just don"t feed it as fast , the 1066 does not care how fast ya feed in the corn or what screen is in it.

Mr.Obvious · Mar 25, 2014

Well maybe his feeders are on top of a hill.

DaninKansas · Mar 26, 2014

Agreed. Our grinder got pulled to a lot of places that only a "big" tractor could go. Going through the feed lot to fill feeders in the middle of winter it wasn't uncommon for the ruts to be so deep that tires didn't touch the ground.

IS IH 1066 TO BIG FOR NH 355 GRINDER MIXER

GHMALLARD

New User

caterpillar guy

Well-known Member

GHMALLARD

New User

jon f mn

Well-known Member

Anonymous-0

Well-known Member

RodinNS

Well-known Member

Bradiniowa

Member

the tractor vet

Well-known Member

Mr.Obvious

Member

DaninKansas

Member

Similar threads