Brent in IA
Member
This message is a reply to an archived post by super99 on February 13, 2011 at 15:45:32.
The original subject was "Kinda OT, grain bin for shed".
I did this 10 years or so ago. It was written up in Farm Show magazine, the photo attached shows it before I enclosed the front and put a walk-door and roll-up door on it. I took the bin apart completely and un-staggered the panels when I re-bolted and put it on the pony walls so the ends were flat and not 1/2 panel off. Has worked great for a shop for 10 years so far!
The original subject was "Kinda OT, grain bin for shed".
I did this 10 years or so ago. It was written up in Farm Show magazine, the photo attached shows it before I enclosed the front and put a walk-door and roll-up door on it. I took the bin apart completely and un-staggered the panels when I re-bolted and put it on the pony walls so the ends were flat and not 1/2 panel off. Has worked great for a shop for 10 years so far!