1650 gas head bolts ?

dairyfeeder · Mar 9, 2014

Im. changing the head gasket on my 1650 gas, Do i need to replace the head bolts?

Anonymous-0 · Mar 9, 2014

1650 WHAT?

jimg.allentown · Mar 9, 2014

As a normal thing, probably not. If they are "stretch" bolts, then they are only good for one time around.
Look at the torque procedure. If it calls for torqueing the bolt, then turning it an additional amount, then it is a stretch bolt, and should be replaced rather than re-used. Generally, with a cast iron block and a cast iron head, regular re-usable bolts would be used. Don't normally get into the exotic stuff until you have aluminum head and iron block.

chucksoliver77 · Mar 9, 2014

If you are working on a 1650 Oliver no. Chuck

greg oliver · Mar 9, 2014

If that's an oliver I reused mine. You can post your question on the oliver forum, ask for J.W. Schwiebert, he knows olivers! I checked IT manual for head bolts, only found tightening torque's 112 - 117 and oil screw 90-100. Hope this helps. Greg

1650 gas head bolts ?

dairyfeeder

Member

Anonymous-0

Well-known Member

jimg.allentown

Well-known Member

chucksoliver77

Well-known Member

greg oliver

Well-known Member

Similar threads