Oil pressure sending unit, Cat 252B skid steer

randallinMo · Feb 28, 2014

Do any of you guys have a schematic to show me where the oil pressure sending unit is on this skid steer? I need to replace mine and don't have a clue what or where it is. Any help appreciated.

Anonymous-0 · Feb 28, 2014

I'd start looking near the oil filter, and along oil galleries on the motor, along the camshaft.

mite-help · Feb 28, 2014

Also, You may look for a rubber oil line going to a sender unit mounted remote. have seen this on cat-power.

Larry NEIL · Feb 28, 2014

Call a Cat dealer and talk to the service manager, they will tell you.

GVSII · Feb 28, 2014

(quoted from post at 08:33:57 02/28/14) Also, You may look for a rubber oil line going to a sender unit mounted remote. have seen this on cat-power.

One of my P/U trucks used an O/P sender that could be used on a CAT powered piece of equipment.The packageing on a new sender stated that if useing with a CAT engine to remote mount the sender.So yes it may be mounted on the frame or even the fire wall.

Oil pressure sending unit, Cat 252B skid steer

randallinMo

Member

Anonymous-0

Well-known Member

mite-help

Member

Larry NEIL

Well-known Member

GVSII

Member

Similar threads