Aftermarket Cummins B Series Parts - suppliers

Does anybody have aftermarket supplier(s) for Cummins B series engine parts? Cummins only make the cylinder block, head and crankshaft. Everything else is purchased. These suppliers have to be selling to other sources than Cummins. This is the same engine that is used in the Dodge pick up trucks, it was also used in Case IH tractors but branded as a Case IH engine until 3-4 years ago.
You have to be a little careful as the engine has been updated multiple times and has multiple accessories but the part number is usually on the old part.
Thanks in advance.
 
They are readily available. Do a google search. To get the right parts for a Cummins you will need the CPL number from the tag on the timing case.
 
Cummins is a huge international company. I think sales last year were $10B. They license numerous sources for their engines. My Branson 6530C tractor was built by Kukje in Korea but the Cummins B3.3 engine came from Komatsu in Japan, licensed by Cummins USA.

Yes there are numerous variants of the B engine.

Mark
 
Probably one of the most copied engines out there. All kind of aftermarket parts from Chinese junk to quality parts. We use a lot of aftermarket replacement parts with no adverse problems. Most but not all of the parts do what I call go forward, other words the latter or better parts will fit the earlier engines but not always. As the other posters stressed it is important to know what version of the engine you have, they all look pretty much the same but their have been a lots of improvements over the years.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top