RBnSC
Well-known Member
Did not get to work on Tractor during the holidays like we had planned. This is where we are engine is out of 4230 almost every thing is loose on 3020 and only need to block it up slide front end off then unbolt engine and set it out of the way.
Today we took the bottom pulley off to get clearance between the pulley and the yoke that supports the front pump. Had the pulley machined and ground the yoke that we had from another tractor. Will have pictures of the finished products and our progress tomorrow.
Ron
Today we took the bottom pulley off to get clearance between the pulley and the yoke that supports the front pump. Had the pulley machined and ground the yoke that we had from another tractor. Will have pictures of the finished products and our progress tomorrow.
Ron