danny scott
New User
I bought a 2000 that needs to be redone can you give me the ifo that this serial number means the dealer says my bore stroke is to large for a 2000. my serial number is B939968
- Thread starter danny scott
- Start date
Ultradog MN
Well-known Member
- Location
- Twin Cities
Something is wrong with your serial #.
I think the Thousand serial #s only went up to 450,000 or so.
Something may be wrong with your dealer too.
The 2000 3 cylinder engines were all 158 CI = 4.2" bore by 3.8" stroke. You could have a different engine from another tractor such as a 175, 192 or 201 CI as they were all interchangable. But any competent engine man could do a little bit of simple measuring and tell you what you have.
I think the Thousand serial #s only went up to 450,000 or so.
Something may be wrong with your dealer too.
The 2000 3 cylinder engines were all 158 CI = 4.2" bore by 3.8" stroke. You could have a different engine from another tractor such as a 175, 192 or 201 CI as they were all interchangable. But any competent engine man could do a little bit of simple measuring and tell you what you have.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy