good use for a scoup

ericlb

Well-known Member
thought id repost this here as the guys on the n forum liked it, [ the tractor is my ford jubilee] im buildinf fence in a remote location and needed something to get everything up into there as well as lay the wire since as usual if it involves labor its me alone this old dirt scoup modification works great, just turd it so the scoup faces the rear and put a piece of 3/4 all thread between the lift pin holes it will hold 2, 1320 foot rolls of wire and your post driver, fence streatcherm an asst tools , oh and your lunch box too
a133434.jpg

a133435.jpg
 
Not to make fun of your typo, but we used to haul the fencing supplys in the "turd hearse" (manure spreader). Great idea though.
 
I got a small ATV that came without a rear rack so I when I built one for it, I incorporated a bar that held 1 1320' roll barb less and 1 roll electric wire. Since the property we were fencing was a side hill, it made my life so much easier going up hill between trees.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top