Kuboat B8200 part 3

old

Well-known Member
Well I had the hyds working just fine one day then the next after about 15 minutes they stop working. I am thinking the old hyd filter screen is clogged so bad that I could not clean it good enough to work for long or that the pump is about to go out. So anybody have the part # for the filter screen and or any other ideas as to what maybe wrong.
Also I can not seem to find how to engage the 4 wheel drive so where is the control for it??
Thanks
 
I never had problems with hydraulics on the five kubotas I have owned. So I can't help you much there. I have only cleaned the screens and changed the filters.
The 4 wheel drive is down by the back of your right foot as you are sitting on the tractor on the ones I have had. Its just has two positions. Either in or out of 4 wheel drive.
 
(quoted from post at 12:29:08 10/01/13) So anybody have the part # for the filter screen and or any other ideas as to what maybe wrong.Thanks

I posted the filter part number in your first Kubota thread but since it was my post you just zoomed over the part number

KUBOTA PN 67800-37120
 
No I did not just zoom over it I did as someone else said and tried to clean the screen first. And I did not go back to my first post to look for the number again
 
On this one there is what I believe to be a diff. lock that you step on with your right heel then above that is the high/low for the transmission and next to that an empty place where I figure the 4 wheel drive lever should be but it is not there
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top