JDSeller and others....JD4020 loadshaft seal

Sparktrician · Sep 20, 2013

Thanks guys, tore this apart last night, will pickup new parts from Deere this afternoon. The shaft seems to be fine. It had bushings with O-rings in it already....but the frame had a lot of side to side play, and one end cap was missing.

That was a pretty straight forward job coming apart, back together should be as simple, Thanks!!!

David G · Sep 20, 2013

Good to hear, make sure and shim it up snug.

Tx Jim · Sep 20, 2013

Missing cap covering L/D control shaft is a typical symptom of too much play between drawbar support and trans case.

JDSeller and others....JD4020 loadshaft seal

Sparktrician

Member

David G

Well-known Member

Tx Jim

Well-known Member

Similar threads