Miniature Bucket Teeth

Dr. Walt · Aug 14, 2013

I've already posted on the Crawler, Dozer, Loader, & Backhoe Forum, but I'll also post it here.

I have a SMALL Yanmar landscape tractor with a
front loader and since most of my work is in rock
& gravel and not dirt, I'd like to put on
miniature bucket teeth to make the digging easier.

Does anyone know of a source for the miniature
bucket teeth & adapters?

I need contact information: NAMES, ADDRESSES, PHONE NUMBERS of Retailers, Wholesalers, Manufacturers, Anyone that would have these things.

Thanks in advance.

Doc

LPgas only · Aug 14, 2013

try this sight:
http://www.berlon.com/

Dalex · Aug 14, 2013

How about the ripper teeth on a Bobcat bucket ? They are about 3" long and an inch wide. you mount them on weld-on shanks. Tractor supply should have them , or "Woods Equipment co." Same teeth as the ripper teeth on a Gannon scraper...

Anonymous-0 · Aug 14, 2013

They're a pain but crimp on skid steer teeth. If you want smaller, the teeth on the scarifiers of a box blade are narrower but I don't know if you can get bucket adapters for them.

Geo-TH,In · Aug 14, 2013

My terramite has 3 teeth on the 12 inch backhoe bucket, welded to bucket. Not sure this is what you are looking for, but their number is 1-800-428-3772.

When I get in to something hard and the front bucket can't do the job, I use the back bucket to break up the ground, then use the front bucket to pick it up. I would be lost with out the back bucket.

Mike M · Aug 15, 2013

I needed teeth for a Kubota excavator. Kubota was high dollar.
Stopped at the local Bobcat dealer/rental place and they had them at a very good price.

Miniature Bucket Teeth

Dr. Walt

Well-known Member

LPgas only

Member

Dalex

Well-known Member

Anonymous-0

Well-known Member

Geo-TH,In

Well-known Member

Mike M

Well-known Member

Similar threads