fairbanks magneto

dmiller · Apr 29, 2013

I know this is a type FM fairbanks magneto not sure what tractor it is set up for though. It was in a box of spare parts I was given. The previous owner had fords.????
Thanks

GVSII · Apr 29, 2013

(quoted from post at 12:39:17 04/29/13) I know this is a type FM fairbanks magneto not sure what tractor it is set up for though. It was in a box of spare parts I was given. The previous owner had fords.????
Thanks

ooks like that mag came off a 2N Ford (front mount dist./mag)

old · Apr 29, 2013

I agree with the other guy that fits the N series front mount distributor system. Those are hard to come by and many would love to have one

dmiller · Apr 29, 2013

Thanks again to those of you with more experience than myself. I just wanted to confirm that it was what I thought before incorrectly listing it on ebay.

Bob · Apr 30, 2013

.
<img src = "http://ytforums.ytmag.com/photos/4932.jpg">

Here's how the made assembly mounts in place of the goofy front mount distributor shown in the lower photo.

<img src = "http://www.fordn.com/imag_2n/011_distributor1.jpg">

dmiller · May 6, 2013

Apparently not so much. It was on ebay for a week and went for $20. Granted it did have a few ailments.

old · May 6, 2013

Ya not called for all that much unless the right person sees it and then it can go high but like any thing it is all in who wants it and how badly they want it

GVSII · May 7, 2013

If I were to put that on E-BAY I'd put a reserve of more than $20.00 on it.

old · May 7, 2013

I don't even mess with Flea bay to many factors and all Surcharges etc etc

fairbanks magneto

dmiller

Member

GVSII

Member

old

Well-known Member

dmiller

Member

Bob

Well-known Member

dmiller

Member

old

Well-known Member

GVSII

Member

old

Well-known Member

Similar threads