Aftermarket loader pins & bushings?

sixtyninegmc · Mar 17, 2013

Anyone know of a source for aftermarket kits, specifically for a John Deere 260 tractor-mount loader? The green parts are pretty spendy.

MN Scott · Mar 17, 2013

Any machine shop with a lathe should be able to make you those parts for a reasonable price.

Rick Kr · Mar 17, 2013

If you know your sizes McMaster-Carr will most. Google them, tons of stuff in their catalog.

Rick

37chief · Mar 17, 2013

The secret is how hard to heat treat them. Too hard they will be brittle and brake, to soft and they wear wear out. Best is to fine replacement parts from the manufacture. Keep looking you will probable find something. Have you had them turned? This will give a like new set. stan

bison · Mar 17, 2013

I just got finished fitting my "new to me" belarus with a worn out loader, i had to replace most pins and bushings.
I make my own from standard precision roundstock and precision heavy wall tubing.
If i happen to have chromed cylinder rod from a old hydr cylinder i make pins from that as well.
Wear is not an issue if you grease up regulairly.

Aftermarket loader pins & bushings?

sixtyninegmc

Member

MN Scott

Well-known Member

Rick Kr

Well-known Member

37chief

Well-known Member

bison

Well-known Member

Similar threads