Chrome stack

iowafarmer20 · Jan 21, 2013

I have seen for smaller John deere tractors like a 720, straight chrome stacks with baffles. I was wondering if you guys knew of a company that made a bigger chrome stack (4ft) with baffles for a JD 4050?? Any info would be appreciated

Thanks

bobs old iron · Jan 21, 2013

i would think your local muffler shop or auto/truck houses, might carry them, may need to trim it, or have a little extra crome showing up in the air...

jon f mn · Jan 22, 2013

Go to the Iowa 80 truck stop in Walcott Ia they have them. Bring lots of $.
Untitled URL Link

ericlb · Jan 22, 2013

simple, how big is the exhaust pipe? the i -80 chrome shop has 4 foot stacks for trucks in sizes from 4 inch diameter up to 8 inch even 10 if you really want some flash there is a flush mount chrome muffler too, [ the chrome band clamps hide the seams], you should be able to build something that suites your needs, look online at their offerings, ummm these aint cheap... for 10 years now the new wife has not allowed me near the i-80 chrome shop, i knew that first bill she got back then was a whopper , apparently it was more than that lol

1206SWMO · Jan 22, 2013

Check out Thomure Manufacturing at East Prairie,MO...

buickanddeere · Jan 22, 2013

Feeling inadequate ?

Texasmark1 · Jan 22, 2013

I bought a chrome straight stack for a 4230 (100 hp diesel) from a supplier on the internet. Forget the exact dimensions. It was at least as tall as the top of my cab. I think it was 4" in diameter with a flange mate and at least 3' long. Forgot the price but wasn't all that bad.

Parades were a blast. It was restored, factory paint and all, really looked sharp. I would put American flags all over it and little toy fans on a stick in RWB colors. It was loud although that is not why I bought it, and at idle you could hear each one of those jugs hitting. Got a lotta thumbs up from the crowds. Oh and it was a 1974 and built in the USA and I had a sign attesting to that too. Maybe it was the sign that got the toots. Seems reasonable.

Mark

jm. · Jan 22, 2013

I have dealt with this guy for over 30 years. Quality products and first class operation. Probably has it in stock but if not can build you anything you want with good prices.

Pete in MD · Jan 22, 2013

b&d
Feeling arrogant and superior?

Erik Ks farmer · Jan 22, 2013

I have one on my 1105, 4" that was made at a local muffler shop. A lot easier than replace the old elbows when they gave out.

Justin SE IOWA · Jan 22, 2013

(quoted from post at 15:33:32 01/22/13) b&d
Feeling arrogant and superior?

LOL I was thinking the same thing!

buickanddeere · Jan 22, 2013

Just wondering why you, Pete and Iowa feel the
need to mount a large attention grabbing phallic
symbol on your machine?

Pete in MD · Jan 23, 2013

b&d

I don't feel the need and I don't have any on my tractors.

It's Iowa's tractor and he can do whatever he wants with it.

You make a lot of helpful posts on this site. Why do you "feel the need" to make the arrogant comments you do?

Pete

Chrome stack

iowafarmer20

Member

bobs old iron

Well-known Member

jon f mn

Well-known Member

ericlb

Well-known Member

1206SWMO

Well-known Member

buickanddeere

Well-known Member

Texasmark1

Well-known Member

jm.

Well-known Member

Pete in MD

Well-known Member

Erik Ks farmer

Well-known Member

Justin SE IOWA

Member

buickanddeere

Well-known Member

Pete in MD

Well-known Member

Similar threads