Guys, my small snow blower a little Craftsman 3hp 20" cut 2 stroker quit spinning, I took it apart, there is a little flange that attaches to the control cable, when you pull the handle/cable, there is a little pin that goes from this flange that when the flange tips, goes to the bracket that the idler pully rides on and pulls the idler down against the belt to engage the auger. Pin broke, problem is this, in order to order the correct part I need a readable parts diagram. Of course you cannot just walk into a sears parts store and show "em what you have, "cuz there is no walk in Sears parts store. They do offer an online parts diagram that no matter how big you blow it up is unreadable. Anyone have a prts book or experience with this? Thanks Pete