Three way push blade idenify the original manufacturer

Ron Corkum · Dec 14, 2012

I have a three way push blade that I acquired late this summer.

The front section of this plow appears to be factory made but someone had lengthened it for a rear Bularus tractor hook up.

My question can anyone idenify the original manufacturer of this plow by viewing the attached picture.

I wish to see a picture of an original factory model and learn what vehicle this plow was originally designed to fit.

In advance: Thanks for any light you may be able to shed on this mystery with me.

Ron

Ron Corkum · Dec 14, 2012

Sorry there seems to be a problem with uploading the picture ,so please disregard my previous post post!
Thanks

Al L. in Wisc. · Dec 14, 2012

Maybe if you shed some light on your subject, we could see it and help.

Royse · Dec 14, 2012

If you're uploading using modern view, don't forget to click the "Continue"
button after you upload and see the picture in the little preview box.

Ron Corkum · Dec 15, 2012

my plow picture became a double post!

jm. · Dec 15, 2012

I think you will find that it was made kinda generic in that it would or could be made fit about any 40/70 hp tractor. Not sure what brand but have seen them around since the early 60s. Pretty much a SNOW blade because of the spring trip blade, would maybe spread lose stone but not much for a real blade.

Ron Corkum · Dec 15, 2012

Thank You for your reply, most helpful

Three way push blade idenify the original manufacturer

Ron Corkum

Member

Ron Corkum

Member

Al L. in Wisc.

Well-known Member

Royse

Well-known Member

Ron Corkum

Member

jm.

Well-known Member

Ron Corkum

Member

Similar threads