We recently purchased a house built in 2007 with a Bryant Evolution Control thermostat. The house has three zones, controlled by duct dampers. Previous owner was the HVAC contractor and is dead.
One of the zones is OFF - so says the display in that area. I have the original Homeowner's Guide, and the Installation Manual - but the word "zone" is not in either piece of documentation.
I can't break the code to start the zone which is now OFF. Can anyone tell me what buttons I need to push?
Thx in advance
One of the zones is OFF - so says the display in that area. I have the original Homeowner's Guide, and the Installation Manual - but the word "zone" is not in either piece of documentation.
I can't break the code to start the zone which is now OFF. Can anyone tell me what buttons I need to push?
Thx in advance
