(800) 853-2651
SHOP NOW

Roof raising pics O/T


Here.... Some of these guys'll blow a gasket if they venture down there :roll:

I got it up finally :wink:
11545.jpg
11546.jpg
11547.jpg
11548.jpg
11549.jpg
11550.jpg
11551.jpg
11552.jpg
11553.jpg
11554.jpg
11555.jpg
11556.jpg
11557.jpg
11558.jpg
11559.jpg
11560.jpg
11561.jpg
11562.jpg
11563.jpg
 
Lyle,
I knew you would pull this project off! Just didn't know you had acess to that big a skyhook.LOL I figured you would rig a ginpole to the trakhoe. I guess you pulled in a "favor" Hea.! Nice job. Now jump over to the Case forum and tell us about the Case 930, under the new roof.
Loren The Acg.
 

THANKS for sharing ... been watching for This Post .. wish I had some of your talent on how to get things done ... and it works ...

If I would have try that ... will there would be a big pile of wood and NO ROOF ...

THANKS again for sharing ...
mark
 
Dad always says its not what you know, its what you can afford to buy (or borrow) that makes your project come out great!
 
Dad always says its not what you know, its what you can afford to buy (or borrow) that makes your project come out great!
 
All I can say is, "Amazing"!

I also envisioned a pile of lumber and twisted sheet metal on the ground after she let loose.
 
Lyle nice job! Would you send me an email. I have a lot of questions I would like to ask about how you did this. I am thinking about building a 40 X 32 or a 40 X 48 with 14.5' clearance and I have a fear of landing when I fall. I like the idea of finishing the top and then putting it ing place like you have done.

Thanks

JWalker
 
(quoted from post at 01:53:11 10/17/12) Lyle nice job! Would you send me an email. I have a lot of questions I would like to ask about how you did this. I am thinking about building a 40 X 32 or a 40 X 48 with 14.5' clearance and I have a fear of landing when I fall. I like the idea of finishing the top and then putting it ing place like you have done.

Thanks

JWalker
Click to expand...
ou can send me one
my name at hotmail dot com
 
Nice job. Did you see any flex in the roof when you lifted it?

I see you posted around 4pm my time. Bet you already have it sided right? That should have given you 3 hours of daylight.

I know how fast you work. If it is not done by tomorrow I won't believe it.

Rick
 
(quoted from post at 02:30:44 10/17/12) Nice job. Did you see any flex in the roof when you lifted it?

I see you posted around 4pm my time. Bet you already have it sided right? That should have given you 3 hours of daylight.

I know how fast you work. If it is not done by tomorrow I won't believe it.

Rick
Click to expand...
i Rick, no flex that I could see, Im sure there must of been a little but nothing serious. The crane operator told me the roof weighed ten thousand pounds, not as heavy as it looks.
PS how is the backhoe working out for you??
 
Gotta admit, I was with the "twisted metal and pick-up-sticks" contingent when you first told about the plan.

Congrats on proving me wrong. Nice job!
 

Thanks for the update. Good way to do this it seems. A tree company hired a mobile crane to lift the tree off of my house after the late June storm. Their bill came to only about $350 for 3 hrs. work (the crane only, sadly) so that part is very reasonable to me vs. being several feet off of the ground on ladders and scaffolds and hoisting material up that far.
 
You must log in or register to reply here.

Similar threads

Majorman
Tractor Show Video 19/3
Replies
0
Views
124
Majorman
Majorman
kcm.MN
Did I straighten this mess out correctly?!?!?
Replies
13
Views
747
Stroby
Stroby
kcm.MN
2023.07.12 Tractor Pic
Replies
2
Views
254
KL in Wi
K
J Hamilton
A few pics from a show today
Replies
17
Views
2K
used red MN
U
super99
OK, I screwed up
Replies
0
Views
260
super99
super99
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top