OLD rear tractor wheel.

Farmallb · Aug 13, 2012

Ive got 2 OLD rear tractor wheels. Both came off of a CC Case. I think they might fit a F-20 Farmall. One is completly shot. Had calcium in the wheels and it got out and ate up the rim and even into the flat spokes.

The other is in great shape, considering. Considering that whoever welded the spokes to the rim had just got his welder that morning and this was his first job. The welding is terrible.
Do you think its worth trying to sell online, or just junk it out with the other I should make around $15ea as junk.

Ozlander · Aug 13, 2012

Sounds like junk to me.

DeltaRed · Aug 13, 2012

Someone out there has tractor with a badly rusted wheel.They just love to have your good wheel.PS....Any good/decent welder can repair or rerim that hub/wheel.Keep em,sell em,or givethem away.Just DONT junk em!

casenut1 · Aug 13, 2012

it's only junk if it has absolutely no use.

JDseller · Aug 13, 2012

How many acres do you have to keep the valuables on??? LOL If you can get $15 each for scrap then you will not make much more trying to sell them to some one to use. They will come an look at them and then remind you that the one is pure junk an they they really need a pair. So on and so forth until your so mad that 15 cents for scrap will look real good.

I can get new blank rims for less than it takes to sand blast an old rim up and prime it. You really don't have anything of value. The good rim is welded to the hub poorly so it would have to be cut off and re-welded. Plus it is rusty on the out side too. The hubs/spokes are worth scrap only. I would just scrap them and forget it.

OLD rear tractor wheel.

Farmallb

Well-known Member

Ozlander

Well-known Member

DeltaRed

Well-known Member

casenut1

Well-known Member

JDseller

Well-known Member

Similar threads