Vernon in Ks
Member
Do they not role the edge on disks anymore. I have been looking for someone that does this in my area and come up empty.
- Thread starter Vernon in Ks
- Start date
Gary from Muleshoe
Well-known Member
I was through Osage City back in April and seen a sign at a shop on 56 highway that said we do disc rolling.
Ralph Bauer
Well-known Member
IIRC, they are talking about "sharpening" the edges of disks on a disc plow, cuts better and farmers use them up until too small (diameter). Supposedly does better compared to not sharpening them, especially on one way disc plows. Never seen it but heard about it here in sw OK (am 43...)
Ralph in OK.
Ralph in OK.
During the late 50’s and early 60’s I called on implement dealers In Oklahoma. The Amy disc roller was very popular it was a set of rolls that were set at a angle to each to form a V that would extrude the outer edge of the disc to sharpen it. The disc blades never had to be removed from the shaft and none of it was ground away. They were terrible noisy as mentioned. gitrib
It's really not "sharpening" like a lawn mower blade, it rolls the blade or "stretches" the blade to a sharp edge. You don't loose any iron to speak of as grinding on them and in turn the blades will last longer. We used to roll our disc every other year. It is a 490 ih and still has the original rear blades but the old girl is in need of new ones now. The disc was bought new in 1975.
It's really not "sharpening" like a lawn mower blade, it rolls the blade or "stretches" the blade to a sharp edge. You don't loose any iron to speak of as grinding on them and in turn the blades will last longer. We used to roll our disc every other year. It is a 490 ih and still has the original rear blades but the old girl is in need of new ones now. The disc was bought new in 1975.
Anonymous-0
Well-known Member
Check out ZOGGS DISC ROLLING on Facebook. Explains it all about disc rolling.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy