Richard G.
Well-known Member
With all the talk of redneck ways, I thought I would show my tire repair. I ran this tire about 6 years with the tube showing in the hole. Was at the tire shop one day and asked if I could bring it in for a boot. The parts truck was there and the driver had a 10 by 10 inch boot. He said before we put the boot in to sew up the tire with something to keep it from spreading. Drilled holes and used an old boot lace. Glued in the boot and then glued a "hogback" boot that went bead to bead. Been holding great for a year pulling a sub soiler and 7 foot disk.
It is on a 51 VAC Case
It is on a 51 VAC Case
