O/T the mill is gonna get volts

Anonymous-0 · Feb 5, 2012

Might as well get some electricity to the old mill to run some lights :shock:

Mike (WA) · Feb 5, 2012

Make sure you get that wire deep enough so it don't freeze. . . LOL

How deep is the frost layer up there now?

donjr · Feb 5, 2012

Wow! Whatta neat litter box for Smokey!

RayP(MI) · Feb 5, 2012

Yeah, gotta be below the frost line or those electrons won't flow.

Tony in Mass. · Feb 5, 2012

Wish I had a hoe. Ma sista gots freinds who is hoes, but they can't dig a straight line like dat.
The guy I bought the tires from yesterday had - he don't even know- 15? 20? small hoes. kubuto jd, every name out there... He didn't want to put a price on any of them. Last night was the first time I had nightmares of backhoe attachments... or maybe it was the blacklabels...

donjr · Feb 5, 2012

Up where Lyle is, they put antifreeze in the electricicals at the goat wheel where it's gentilated. That way the spitensparkins are wormed so it'll flow true da conduckalators wif little risisters.

Bob Bancroft · Feb 5, 2012

Lots of interesting comments! When is the three or four wire/grounding/neutral debate going to start? We know electricity flows differently across borders!

CCer · Feb 5, 2012

I remember we had a sawmill customer in the backwoods, said it cost too much from the utility. So he bought a BIG genset to power the whole business.

flying belgian · Feb 5, 2012

lyle, I cannot believe you. You think of something in the morning and by evening it is done. Weather it is overhauling a tractor or installing electric across the yard. If I could get one tenth the work done in a week that you do, I would be a very wealthy man indeed. SLOW DOWN!! you are making the rest of us look bad.

Spook · Feb 5, 2012

Lyle, you do get things done.

teddy52food · Feb 5, 2012

I like that! You noticed it too!

Anonymous-0 · Feb 5, 2012

(quoted from post at 19:03:45 02/05/12) Make sure you get that wire deep enough so it don't freeze. . . LOL

How deep is the frost layer up there now?

here I was diggig was over 3 feet

Anonymous-0 · Feb 5, 2012

(quoted from post at 22:17:47 02/05/12) lyle, I cannot believe you. You think of something in the morning and by evening it is done. Weather it is overhauling a tractor or installing electric across the yard. If I could get one tenth the work done in a week that you do, I would be a very wealthy man indeed. SLOW DOWN!! you are making the rest of us look bad.

ont worry, its all camera tricks!

Anonymous-0 · Feb 5, 2012

My BUCKET LIST is nearly complete! :wink:

xfarma · Feb 5, 2012

I need to get me one of those cameras!!!!!!!!!

Shetland Sheepdog · Feb 5, 2012

Where's the 2" sched 40? Don't forget to use steel sweeps so the pull line don't burn through! Oh yeah, don't forget the slip joints for frost heave!
You owe me $0.02!

Just trying to help!

Dave

Anonymous-0 · Feb 5, 2012

(quoted from post at 00:54:56 02/06/12) Where's the 2" sched 40? Don't forget to use steel sweeps so the pull line don't burn through! Oh yeah, don't forget the slip joints for frost heave!
You owe me $0.02!

Just trying to help!

Dave

ang Shetland! Isa just gonna throw it in zee trench. I should say Isa threw it in zee trench already and backfilled...outa sight outa mind LOL

Hoofer B · Feb 5, 2012

I hope you have enough ampacity.

Anonymous-0 · Feb 5, 2012

I volts your doing a good job.

Anonymous-0 · Feb 6, 2012

Iffn you got that trench open, why not run a wire big enough to RUN the mill, on lectric, then you can put that tractor back to work, in the field!

Mike (WA) · Feb 6, 2012

You must be an old timer on this board, Hoofer- I seem to recall a big flap over "ampacity" about 10 years ago. . .

O/T the mill is gonna get volts

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Similar threads