hey delta red

Anonymous-0 · Jan 26, 2012

would you happen to know the head bolt torques and the con rod torque for that 1206...Thanx I would also need the valve settings, PS I dont have a book on the old monster

DeltaRed · Jan 26, 2012

Not off the top of my head...I can go out the shop
later and find out.

Anonymous-0 · Jan 26, 2012

(quoted from post at 15:27:03 01/26/12) Not off the top of my head...I can go out the shop
later and find out.

Thanx steve, if ya want you can email me...... my name at hotmaildotcom

DeltaRed · Jan 26, 2012

Hey Lyle,I forgot to tell you...Go over to the
Frmall forum,I posted some pics of wedgelock wheel
you might like.Steve

ejr-IA. · Jan 26, 2012

THis out of a IT service book,rods at 105 ft lb and the head bolts are in 3 steps 65,110,final 135 ft lb.Does your 12 still have the solar turbo in the picture it looks like it is?My 12 is coming in the shop for a hd TA ,clutch and mcv valve repair.I put a 3LM 466 turbo on mine boy did that wake it up.

hey delta red

Anonymous-0

Well-known Member

DeltaRed

Well-known Member

Anonymous-0

Well-known Member

DeltaRed

Well-known Member

ejr-IA.

Member

Similar threads