Farmall Super M Push Rod Cover gasket

Scott Limbourne · Jan 14, 2012

Stiener Parts states this is the same as the water jacket cover gasket on the other side but it isnt. Push rod cover is taller and has rounder corners. Any ideas on where to get one?

AG in IN · Jan 14, 2012

(quoted from post at 21:55:42 01/14/12) Stiener Parts states this is the same as the water jacket cover gasket on the other side but it isnt. Push rod cover is taller and has rounder corners. Any ideas on where to get one?

The water jacket gasket on one side and pushrod cover gasket on the other are very different.

Case IH should have the pushrod cover gasket available yet. NAPA store might, too.

You could always cut one yourself out of cork.

AG

Zachary Hoyt · Jan 14, 2012

My local independent parts store has a roll 24x36" of cork gasket material for about $5, I got one but have not tried it yet. Might be the cheapest way to go.
Zach

Scott Limbourne · Jan 14, 2012

Yes I have some but it is thin stuff. That gasket is is fairly tbick because the plate is held on only by few bolts down the center so I assume gasket is thick as to allow for compression so it seals. The covers themselves are like tin amd not something you can torque down for a good seal. Might work though.

Farmall Super M Push Rod Cover gasket

Scott Limbourne

Member

AG in IN

Member

Zachary Hoyt

Well-known Member

Scott Limbourne

Member

Similar threads