Mystery Head Gasket

Nebraska Cowman

Well-known Member
I don't expect all my information for free. I have 4 of these gaskets, NOS that were included in some stuff I bought from a tractor repair shop. Most of the gaskets are IH but I don't recognize this one. The Victor number on it is GD193A-402 but I can't find that in a search. What I did find in a search for Vic-2-Fold is a 1969 catalog I'd like to share with you. You can download and save it as it's a PDF file. In the catalog are pictures of head gaskets with numbers and the number for one that matches is 3154 but that has not found me anything either. The length about matches an SC Case head I have here but the cylinders are closer together. So it must be a fairly compact engine. It's not Allis, It would be for about a 3 3/4 bore. Moline used twin heads, I'm stumped.
00314-1.jpg

Victor 1969 Catalog download
 
Some early MM's had all 4 pistons on one head, I don't know what its for, but it looks very similiar to the one I put in my oliver with a waukasha engine, but that was a 6 cylnder.
 
I wonder if gasket is mfg. by Victor with a Continental Part #.
Also my McCord book lists same #6591 for G193,GF193,GD193 and G206.
 
That was the first thing I thought of was Waukasha 4 cyl. in a fork lift I used to have.It had a goofy water neck set up in the front which could account for the rectangle hole. Can't say for sure. I think when I did it I bought a set from NAPA for it.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top