(800) 853-2651
SHOP NOW

zettor 6245 hydralic steering

A

Anonymous-0

Well-known Member
I am having a steering problem I started with replacing the seals on the steering cyclinder and the piston rings. I had to hone the inside of the cylinder inorder to get the piston and cylinder to go back together. I'm not sure exactly how they fit together to begin with because the tollerance was overly tight I think that is what caused my leak to begin with.
My question is that when I placed the cylinder back on the tractor and started it up the steering wheel turned left to right very fast and continued after a while I asumed that there is air in the line but I am unsure how to remove it or do I have another problem that I am not catching?
 
If it is air in the line, which it sure sounds like it is, it should come out of a double acting cylinder simply by turning all the way to right and then all the way to left. Are you sure the hyd. oil level is up to full?
 
yes the reserve is filled and the fluid is cycling and I have tried to turn it all the way to eather the right or the left but with no sucess I acts like it fights me when I try to turn the wheel. And then starts it fast movement again. I let the tractor run about 30 minouts, at an idle, inorder for it to cycle the air out should it run longer?
 
You must log in or register to reply here.

Similar threads

M
How many O rings? Case 580B
Replies
2
Views
189
mblair441
M
F
265 Massey Ferguson steering
Replies
5
Views
236
damn1981
D
D
Hydrostatic Power steering problem
Replies
4
Views
455
wore out
wore out
H
Ford 6600 power steering line leak
Replies
2
Views
306
Hopper20
H
V
Oliver 1800a steering box
Replies
3
Views
353
P Heisey Harleysville,PA
P
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top