ford 4000 hd industrial.

cesjr38 · Sep 25, 2011

Hey just seeing if anyone can give me some advice. I just picked up a ford 4000 hd industrial with loader and hoe. my local shop told me it was a 1964. serial # is 48748. now the problems. It starts up every time but after a few minutes it wants to stall out, or if you try and put it under any kind of load, it will do the same. at first though it is fine. it acts like lack of fuel or something in the carb. I took the carb apart and it looks to be a reconditioned carb. I also blew out the fuel line and cleaned the sediment bowl. also when it starts to stall you can mess with the choke and get it to stay running. any suggestions?

Anonymous-0 · Sep 25, 2011

Check the tank to see if a bumble bee or clover head, or some other debris is floating over to the outlet, and closing the hole. You may also want to look at the entire electrical system, for glitches. A bad condenser, coil, cap, key switch, all may cause such problems.

bill mart · Sep 25, 2011

if it has a vented gas cap make sure its not plugged. bill m.

Coloken · Sep 25, 2011

If not fuel line blockage or gas cap.
float valve
float valve
float valve

ford 4000 hd industrial.

cesjr38

New User

Anonymous-0

Well-known Member

bill mart

Well-known Member

Coloken

Well-known Member

Similar threads