Ford 2000 Hydraulics

Gary Starr · May 14, 2011

Blew high pressure line on hydraulics. replaced, filled tractor with oil and no lift on the three point?? What do I need to do?

snoop-nc · May 14, 2011

I'm making an assumption here as I'm not familiar with 2000.

I have '63 4000 (4 cyl gas)...have had to open/remove a plug that is on top of hyd. pump to "bleed off" system to get 3 pt. to operate...replacing plug when air is out. Don't rev above an idol or you will take an oil bath for sure!! Yours maybe similar.

If that does not work...post back with year model, etc. an someone more familiar with your tractor can help you.

Good Luck....Rick

BCnT · May 14, 2011

i had a similar problem on my '62 2000...used a air gun and shop rags to pressurize hydraulic sump and it primed pump pretty quick...engine running

Ford 2000 Hydraulics

Gary Starr

New User

snoop-nc

Member

BCnT

Well-known Member

Similar threads