Picture Of The Day X3

guido

Well-known Member

The starter turned the engine about
2 turns, then the engine stopped.

I wander why!

Guido.

cvphoto150769.jpg


cvphoto150770.jpg


cvphoto150771.jpg
 
Muir hill 101

Bellhousing cover WAS on. How did they get in there. Sure made a nice mess!

Guido.
 
(quoted from post at 09:50:04 03/25/23) Muir hill 101

Bellhousing cover WAS on. How did they get in there. Sure made a nice mess!

Guido.

Must have been an easy entrance/exit for that mouse to go in and out to bring that much crap in there.
 
Must have been an easy entrance/exit for that mouse to go in and out to bring that much crap in there.

''Must have been an easy entrance/exit for that mouse to go in and out to bring that much crap in there.''

IIRC, there's a hole underneath the ''torque tube'' just ahead of the transmission where the clutch release linkage rod and clutch pedal arm meet.
 
common on A, B and C's , back of the torque tube is open where the clutch rod is.

leaving the cap off and hanging it on the wall generally solves the issue.
 
el6147,

Thanks! I will look next week. Still waiting on the carb kit. Will also get to the stater then,

Guido.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top