Goodman Furnace

This may not be the right place: My furnace was making a noise called repairman . He said it was the blower wheel . He replaced that . The noise continued. When I called I told the lady it sounded like a bearing in motor. Anyway that cost me $100 for service call $99 .00 blower wheel - $14 shipping - tax $25.00 total was $385 . I took the motor apart. Replaced the bearings a total of about @8.00 required 2 total cost $16 + tax . I ll never do that again. What I m trying to say is get in there and work on it . You re not going to hurt it . I made a bad mistake. I don’t believe you should work on gas valves or heat exchangers

This post was edited by davyfireball on 03/21/2023 at 04:48 pm.
 
You need to find another repairman.
Anyone who puts a new blower wheel
on a motor with bad bearings has no
business working on a furnace. He
should have replaced the motor to
start with.
 
Why not work on gas valves or heat exchangers?

Very few of us have either the knowledge or the skill to SAFELY service those items. Improper servicing of those
items could result in serious consequences.
 
(quoted from post at 04:31:11 03/22/23) Why not work on gas valves or heat exchangers?

Very few of us have either the knowledge or the skill to SAFELY service those items. Improper servicing of those
items could result in serious consequences.

REALLY????
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top