Name that tool.

Ultradog MN

Well-known Member
Location
Twin Cities
One you don't often see.
I used mine today.
We're going out to dinner now.
Will check in later to give another clue if needed.

cvphoto126754.jpg


cvphoto126755.jpg
 
Ultradog MN,

Mine is flexible and it has changeable heads. One is a 1/8 allen wrench,

Guido.
 
Ive got two, a flex head screwdriver for carb mixture screws and a flex head 1/8 Allen for GM points through the window on the distributor cap. Been a while since I used either one.
 
(quoted from post at 20:21:05 05/27/22) Ultradog MN,

Mine is flexible and it has changeable heads. One is a 1/8 allen wrench,

Guido.

the allen wrench head was for the points...lift up the little trap door in the side of the cap
 
Bingo!!
Lady I worked for 12? years ago called and asked me to fix her loose stainless steel sink. I did not install it.
1.5 billable hours round trip. Took me 5 minutes to snug up the clips.
She was not impressed by the tool but was happy with the bill.
Bought my wife dinner for her birthday.
The right tool for the job is good.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top