Laying down the weld metal

buickanddeere

Well-known Member
A total of 10 passes to complete the welds to fasten the lid onto a dry storage flask .
cvphoto78744.jpg


cvphoto78745.jpg


cvphoto78746.jpg


cvphoto78747.jpg


cvphoto78748.jpg


cvphoto78749.jpg
 

Test fitting a rack in a new flask . Holds 384 bundles .
Once they get welding on later , wider passes . They dial the current up to 320 Amps or so .
mvphoto70389.jpg
 
(quoted from post at 22:56:31 02/19/21)
Wire is a little heavy for a 120V Walmart
mig welder .

I would have to look but I think that wire is too much for my millermatic 200 also.
Probably too big for any single phase welder.
 

They use almost an entire spool each in both welders to fasten one lid on.
If there is a problem with the weld, they want to be able to trace it down to one spool of wire or the other .
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top