FRONT AXLE PIN THREADS

ryanP · Jan 27, 2021

Hey guys,
Just wondering if anybody can help me out. I cannot get the front axle pin loose on my 572 belarus (1994) Can anyone give me a thread pitch, thread count and size of shaft or bolt I need to have a puller fabricated. My pin is a course thread pin.This is the pivot pins that will allow me to drop the front axle off of the tractor just clarify. Any help would be much appreciated.

Thanks in advance

Centerplate · Jan 27, 2021

Belarus should have metric fasteners most likely.

SVcummins · Jan 28, 2021

Get a thread pitch gauge and that’ll tell you what is then
measure the pin

Jim.ME · Jan 28, 2021

I also believe a Belarus will have metric threads. If you can't get a metric thread pitch gauge to check the pitch with, go to a hardware store, or other place, with an assortment of metric bolts and nuts. Buy 1 each of the sizes and thread pitches (metrics may have several pitches per size, not just coarse and fine) that look close to the size you need. Then go home and try them in/on your pin's threads to get the size. Then you can figure out the total length you need. The same will work for SAE threads if you want to check both.

This looks like one you will need to do the legwork on yourself.

FRONT AXLE PIN THREADS

ryanP

New User

Centerplate

Member

SVcummins

Well-known Member

Jim.ME

Well-known Member

Similar threads