Hobo,NC
Well-known Member
- Location
- Sanford, NC
I have had a special bit for my air hammer for a long time just forgot about it. I have 99 Tahoe in the shop needs all the brake lines so last thing Thursday night I make sure I can break all the bleeders loose one is stuck : ( I am about to grab the induction heater heat it and call it a night and remember that bit. It amazed me how ease it broke free...
While rambling, I have a 96 Chrysler Sebring in the shop a no start a mechanics nightmare : ( It ended up being a bad fuel pump the pump is a walk in the park to change they have a access panel under the rear seat. They don't get any easier that that.
A 04 Saturn 290K on the clock a no crank always a nightmare ended up the ECM fuse was blown from them messing with it.
I did not finish the Tahoe a few other small jobs got in front of it... Its ready to bleed the brakes on will go get it Monday.
While rambling, I have a 96 Chrysler Sebring in the shop a no start a mechanics nightmare : ( It ended up being a bad fuel pump the pump is a walk in the park to change they have a access panel under the rear seat. They don't get any easier that that.
A 04 Saturn 290K on the clock a no crank always a nightmare ended up the ECM fuse was blown from them messing with it.
I did not finish the Tahoe a few other small jobs got in front of it... Its ready to bleed the brakes on will go get it Monday.