(800) 853-2651
SHOP NOW

for Nordic

Sounds like you're making good headway on your project. I don't have the exact seal numbers for the XL-12 but I was running a search myself earlier today and I'll put a link here to the discussion. If the link doesn't come up "live" you'll need to copy and paste it into the browser on a new page. It is an interesting discussion, however, it appears that the XL-12 seal dimensions aren't as easy to cross over as that of the smaller Homelites. If I find better references I'll pass them onto you. Please post on here how you make out getting results. I'm sure your saw will run like new once you put the new seals into it. Wishing you the best - Eric
 
Sorry I forgot the link in my previous response, here it is:

https://houseofhomelite.proboards.com/thread/6549/super-xl-12-crank-seals
 
I think I found the seal you need, SKF 6119. Just make sure the size would be the same on the other side. I'll include the link on this seal where the dimensions are listed.

https://www.motionindustries.com/products/sku/01261448
 
The part number for the seal is 12282-A. I had no trouble looking it up but the two sited for homelite parts that I tried are both out of stock. There are some on ebay.
 
You must log in or register to reply here.

Similar threads

D
ca front timing cover oil seal
Replies
3
Views
1K
thdrduck
T
T
Electrical Problems
Replies
5
Views
475
Texasmark
T
B
1950 JD MT
Replies
2
Views
294
Boelk
B
W
4020 rear main seal. Who knows
Replies
3
Views
576
T.R.K.
T
G
4610 Steerring leak at pitman arm
Replies
7
Views
436
Bern
B
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top