Key for craftsman table saw

AzPeapicker · Sep 12, 2020

I am looking for the 2 prong plastic Key ( yellow) for a Craftsman 8 table saw . Its the Key to work the main switch , no longer available thru Sears . Does any one have that they want to get rid of .
John Forrester E mail [email protected] Ph .Cell 480 250 3864 Have a great & safe weekend .
Az Peapicker

DERM · Sep 12, 2020

There are new keys available from Amazon

old_bc · Sep 12, 2020

Look here.
Keys

AzPeapicker · Sep 13, 2020

Thanks I will try tomorrow

Azpeapicker

Stephen Newell · Sep 13, 2020

I imagine about all you can do is watch ebay for those. I looked in my junk box, thought I might have one. The switch on mine went out and I replaced the entire switch with a regular switch like a light switch.

Dick L · Sep 13, 2020

I use an old saber saw blade. I take it out and lay it in sight of the saw so I don't run out of jig saw blares.

D7fever · Sep 14, 2020

I used a piece of wire, made a u with the wire and put an end in each hole, been like that for years

Key for craftsman table saw

AzPeapicker

Member

DERM

Member

old_bc

Member

AzPeapicker

Member

Stephen Newell

Well-known Member

Dick L

Well-known Member

D7fever

Member