I had an accident this morning where I wasn't thinking and used my wheel puller where I was pushing against a tapped hole. After taking it off I realized that I pushed in the start of the threads and can't get the bolt back in. Looking at the bolt, the thread size is 5/8-11.
If I buy a 5/8-11 tap on ebay can I fix the hole, or do I need to drill it out and tap a bigger size? All of the threads except the beginning are in good condition.
If I buy a 5/8-11 tap on ebay can I fix the hole, or do I need to drill it out and tap a bigger size? All of the threads except the beginning are in good condition.