(800) 853-2651
SHOP NOW

Thanks Jeffcat and Nobite

H

Hay hay hay

Well-known Member
I wanted to treat the wood sides and floor of my manure spreaders. I was looking for an easier method than a brush and roller. I found your recommendation in the archives. I went to Harbor Freight and bought an "Abrasive Blast Gun" based on your recommendations. I works like a charm, fast, easy, cheap and clean. Thanks


Now how about an easy way to fix my dozen half full paint spray cans that no longer work?????
 

That's an easy one !
Take a tubeless tyre valve , remove the core and hold it over the nozzle tube of the can once you have removed the spray head . Connect a tyre inflator to the valve body , use a compressor to put in 2 or 3 PSI into the can , be careful not to over pressurise .
As long as the nozzle tube is not full of dried paint the can will have more than enough gas to allow you to use what's left . Works a treat on WD40 and the like as well . Only draw back is that the air will ruin the paint over time so try to use all the can soon after you've re gassed it .
 
You must log in or register to reply here.

Similar threads

I
Pug Badlands engine and tranny
Replies
3
Views
365
IndyFarmBoy
I
I
OffTopic roof repairs and contractors and insurance
2
Replies
20
Views
1K
INCase
I
C
TIG Welder Recommendations
Replies
10
Views
4K
Dusty MI
D
D
Mini grease gun- not worth the effort
Replies
6
Views
1K
DMartin9N-2N
D
T
Roll pins-cheap and unreliable?
Replies
9
Views
946
John Garner
J
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top