TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

Homelite SX-135 Bandit Weedeater

Welcome Guest, Log in or Register

Author

Patrick Gibbons

04-08-2001 18:31:43

Report to Moderator

I'm looking for a online dealer to buy parts for this weedeater. I need the throttle, throttle cable, and air filter cover.

[Log in to Reply] [No Email]

jmyrick

02-23-2005 09:00:56

Report to Moderator

Re: Homelite SX-135 Bandit Weedeater in reply to Patrick Gibbons, 04-08-2001 18:31:43

sx 135 gas tank leaking at the top of the tank at the round rubber gasket which is really loose.Is there a fix for this or do I need to replace the gasket?
Thanks in advance
Jeff Ohio

[Log in to Reply] [No Email]

jmyrick

02-23-2005 09:07:41

Report to Moderator

Re: Homelite SX-135 Bandit Weedeater in reply to jmyrick, 02-23-2005 09:00:56

forgot to include my e-mail for the tank leak question

[Log in to Reply] [No Email]

p howell

08-12-2004 21:41:18

Report to Moderator

Re: Homelite SX-135 Bandit Weedeater in reply to Patrick Gibbons, 04-08-2001 18:31:43

Is there an online site that will give me a diagram of the bump head. I don't know if the head of this trimmer is missing any parts. It doesn't seem to want to dispence line properly>

[Log in to Reply] [No Email]

Trevor H.....lost screw

06-12-2004 07:55:03

Report to Moderator

Re: Homelite SX-135 Bandit Weedeater in reply to Patrick Gibbons, 04-08-2001 18:31:43

Hi,
Yes, I lost the screw from the bump head knob(i can't be the only one). I thought somebody might have the specs on the screw before I take it apart and start a fight at home depot(kidding). I want to be sure of the length.
thank you in advance,
Trevor Hopkins

[Log in to Reply] [No Email]

Harvey Schoenman

05-20-2006 14:03:57

Report to Moderator

Re: Re: Homelite SX-135 Bandit Weedeater in reply to Trevor H.....lost screw, 06-12-2004 07:55:03

Trevor,

Did you ever find the specs for the bump head screw for the Homelite SX-135? I lost mine today and can't find it. Nor can I find an exploded part diagram on the web.

Thanks,

Harvey Schoenman

[Log in to Reply] [No Email]

Don Wimer

04-07-2004 08:21:43

Report to Moderator

Re: Homelite SX-135 Bandit Weedeater in reply to Patrick Gibbons, 04-08-2001 18:31:43

My weedeater will only run a few seconds. My theory is that the fuel pump is not pressureizing the tank. If this is the probable cause, where could I purchase a valve leaf for the pump? Thanx in advance

[Log in to Reply] [No Email]

BillW

06-29-2004 11:40:58

Report to Moderator

Re: Re: Homelite SX-135 Bandit Weedeater in reply to Don Wimer, 04-07-2004 08:21:43

Sorry but you have the wrong concept for it.
Look for:
-air leak...pin holes in fuel lines etc...
-blocked spark arrestor in muffler..
-if over 5 years old, a carb Diaphragm & gasket kit.
I have the parts for your trimmer.

Bill Walcott
700 N 12th
Marysville KS 66508
785-562-3539
Servicing HOMELITE for over 50 years

[Log in to Reply] [No Email]

Barry Gran

02-11-2004 09:19:14

Report to Moderator

Re: Homelite SX-135 Bandit Weedeater in reply to Patrick Gibbons, 04-08-2001 18:31:43

I have a SX 135 and need to know how to set the high and low carb adjustments for an initial start. I have air, fuel and spark, but it still won't start without a lot of pulling and sweat.

[Log in to Reply] [No Email]

Jerry Parker

09-20-2005 16:47:13

Report to Moderator

Re: Re: Homelite SX-135 Bandit Weedeater in reply to Barry Gran, 02-11-2004 09:19:14

Has anyone answered the question about the carburetor adjustment settings for the SX-135? I need both the high and low settings for initial startup. Also once started and warm how do you adjust the high setting for optimal running? Do you adjust for highest rpm or should there be a little dieseling. (heard this term from a mechanic)Thanks

[Log in to Reply] [No Email]

alabo

08-31-2004 18:41:04

Report to Moderator

Re: Re: Homelite SX-135 Bandit Weedeater in reply to Barry Gran, 02-11-2004 09:19:14

I had the same problem...I found that a wasp had built his nest in the muffler hole. It created back pressure so the fuel wouldn"t go through the combustion chamber. I cleaned it out and it works great!

[Log in to Reply] [No Email]

Don Fuller

08-19-2003 07:16:51

Report to Moderator

Re: Homelite SX-135 Bandit Weedeater in reply to Patrick Gibbons, 04-08-2001 18:31:43

I'm looking for a replacement gastank for my sx-135. Can anyone help????

[Log in to Reply] [No Email]

Steve Burtchaell

08-22-2006 18:09:50

Report to Moderator

Re: Re: Homelite SX-135 Bandit Weedeater in reply to Don Fuller, 08-19-2003 07:16:51

I also need a gas tank for this model. Did anyone find out where such a thing can be purchased?
STeve

[Log in to Reply] [No Email]

Roe Lane

08-23-2003 16:56:50

Report to Moderator

Re: Re: Homelite SX-135 Bandit Weedeater in reply to Don Fuller, 08-19-2003 07:16:51

Don: According to my parts book on the SX-135 (UT-20601) The part number for the tank it has is
a04447, which includes filter, two rubber tubes, wire clamp (for fuel filter) and fuel cap..
Am sorry I do not have one but this may help you in your search...Roe

[Log in to Reply] [No Email]

Jeff

08-13-2003 13:49:47

Report to Moderator

Re: Homelite SX-135 Bandit Weedeater in reply to Patrick Gibbons, 04-08-2001 18:31:43

need a manual for the Homelite SX-135 Bandit Weedeater. I need to know how to take it apart and how to fix it... where can i download the specs. for this?
thanks
jeff

[Log in to Reply] [No Email]

James L. Kalie

04-17-2004 14:55:32

Report to Moderator

Re: Re: Homelite SX-135 Bandit Weedeater in reply to Jeff, 08-13-2003 13:49:47

Where can I get a replacement end piece unit for this weedeater?

[Log in to Reply] [No Email]

dan jenkins

03-24-2004 09:17:18

Report to Moderator

Re: Re: Homelite SX-135 Bandit Weedeater in reply to Jeff, 08-13-2003 13:49:47

do not know i disassembled trimmer found plastic housing cracked where spring goes

[Log in to Reply] [No Email]

Roe Lane

08-23-2003 17:00:49

Report to Moderator

Re: Re: Homelite SX-135 Bandit Weedeater in reply to Jeff, 08-13-2003 13:49:47

Jeff: I have the parts manual for the SX-135 with UT number 20601. Will snail mail to you for $5.00 If interested e-mail me..Roe

[Log in to Reply] [No Email]

Cindy Wyatt

04-09-2003 21:35:50

Report to Moderator

Re: Homelite SX-135 Bandit Weedeater in reply to Patrick Gibbons, 04-08-2001 18:31:43

I can't help you on the parts but my son recently was given one of these weedeaters and would like some help in the mixture parts of gas and oil. Would you possibly be able to give him the mixtures? I have searched the internet over and over and can't find anything on this model of weedeater! Thank you for your time, Cindy Wyatt

[Log in to Reply] [No Email]

LES

07-22-2003 20:08:00

Report to Moderator

Re: Re: Homelite SX-135 Bandit Weedeater in reply to Cindy Wyatt, 04-09-2003 21:35:50

I'VE BEEN USING A 40 TO 1 RATIO
WALMART SELLS A A TWO CYCLE OIL WITH A EASY 2 USE
MEASURING BOTTLE

[Log in to Reply] [No Email]

Ben B

04-19-2003 14:10:01

Report to Moderator

Re: Re: Homelite SX-135 Bandit Weedeater in reply to Cindy Wyatt, 04-09-2003 21:35:50

just buy a small quantity of the two cycle engine oil in autozone or kmart, walmart, acehardware...it's usually only a couple of dollars for about 6-16 oz

follow the directions, usually for 2 stoke weed-eaters, it's about a 50/50 mix,, two-cyc.oil to gas

[Log in to Reply] [No Email]

Bob Rankin

09-19-2003 08:19:48

Report to Moderator

Re: Re: Re: Homelite SX-135 Bandit Weedeater in reply to Ben B, 04-19-2003 14:10:01

50/50 mix??? Yowchie! I use a 40:1 gas to oil mix and my Bandit just purrs.

[Log in to Reply] [No Email]

Jeremy

06-23-2004 14:39:40

Report to Moderator

Re: Re: Re: Re: Homelite SX-135 Bandit Weedeater in reply to Bob Rankin, 09-19-2003 08:19:48

When you say 40:1, what does that mean in terms of ounces or gallons.

[Log in to Reply] [No Email]

will

05-11-2004 11:42:25

Report to Moderator

Re: Re: Re: Re: Homelite SX-135 Bandit Weedeater in reply to Bob Rankin, 09-19-2003 08:19:48

i need a primer bubble and tank for my sx135 anyone know where to get these?

[Log in to Reply] [No Email]

Bon Bon

10-05-2005 17:44:17

Report to Moderator

Re: Re: Re: Re: Re: Homelite SX-135 Bandit Weedeat in reply to will, 05-11-2004 11:42:25

Where can I find a manual for the homelite bandit sx 135 weed trimmer?

[Log in to Reply] [No Email]

mian,g

03-10-2006 18:56:28

Report to Moderator

Re: Re: Re: Re: Re: Homelite SX-135 Bandit Weedeat in reply to Bon Bon, 10-05-2005 17:44:17

where is the shop for me to get some part for my trimmer bandit sx135 in malaysia,
plsssss..... ..... .

[Log in to Reply] [No Email]

Kevin

05-30-2004 20:06:39

Report to Moderator

Re: Re: Re: Re: Re: Homelite SX-135 Bandit Weedeat in reply to will, 05-11-2004 11:42:25

I need the same thing....did you have any luck?

[Log in to Reply] [No Email]

BillW

06-29-2004 12:04:23

Report to Moderator

Re: Re: Re: Re: Re: Re: Homelite SX-135 Bandit Wee in reply to Kevin, 05-30-2004 20:06:39

Which primer bulb depends on the make of the carb...WALBRO or ZAMA.

I keep both on hand.
Bill Walcott
700 N 12th
Marysville KS 66508
785-562-3539
Servicing HOMELITE for over 50 years

[Log in to Reply] [No Email]

Paul LaGant

06-15-2005 13:50:23

Report to Moderator

Re: Re: Re: Re: Re: Re: Re: Homelite SX-135 Bandit in reply to BillW, 06-29-2004 12:04:23

Hey Bill Thanks for your helping people like me. I have the homelike SX 135 and it will not run . It seems to me that it is not getting enough fire. Could you tell me how many amps or OHMS that the spark is suppose to put out or how else can I tell. I think maybe I might need to buy a magneto from you. I was hopping that you could E-Mail Me back with your suggestions. Thank you very much. Paul H LaGant

[Log in to Reply] [No Email]

Jeremy

06-23-2004 14:35:41

Report to Moderator

Re: Re: Re: Re: Re: Re: Homelite SX-135 Bandit Wee in reply to Kevin, 05-30-2004 20:06:39

I needed a primer bubble also and I found one that fit at my local hardware store.

[Log in to Reply] [No Email]

Bill M

04-19-2004 15:39:24

Report to Moderator

Re: Re: Re: Re: Homelite SX-135 Bandit Weedeater in reply to Bob Rankin, 09-19-2003 08:19:48

32:1 is the reccommended mix per the owners manual

[Log in to Reply] [No Email]

Bill Sherman

09-23-2005 18:09:53

Report to Moderator

Re: Re: Re: Re: Re: Homelite SX-135 Bandit Weedeat in reply to Bill M, 04-19-2004 15:39:24

4oz of two stroke oil

1gal of gasoline

32:1 mix

[Log in to Reply] [No Email]

Paul Long

04-28-2003 13:42:44

Report to Moderator

Re: Re: Re: Homelite SX-135 Bandit Weedeater in reply to Ben B, 04-19-2003 14:10:01

My Dad is looking to repair this weedeater but he doesn't have a parts list or diagram. Does anyone know where to get one?

[Log in to Reply] [No Email]

BillW

04-28-2003 20:06:53

Report to Moderator

Re: Re: Re: Re: Homelite SX-135 Bandit Weedeater in reply to Paul Long, 04-28-2003 13:42:44

I stock most all HOMELITE trimmer parts (new & used) and will ship most anywhere.
I also have the illustrated PARTS LISTs available for most any HOMELITE unit.

[Log in to Reply] [No Email]

Charlie

06-06-2004 12:12:02

Report to Moderator

Re: Re: Re: Re: Re: Homelite SX-135 Bandit Weedeat in reply to BillW, 04-28-2003 20:06:53

How do I contact BillW to get a parts list and order something?

[Log in to Reply] [No Email]

BillW

06-29-2004 12:08:07

Report to Moderator

Re: Re: Re: Re: Re: Re: Homelite SX-135 Bandit Wee in reply to Charlie, 06-06-2004 12:12:02

As I work out of my basement...when I'm home, I'm open.
Thanks
Bill Walcott
700 N 12th
Marysville KS 66508
785-562-3539
Servicing HOMELITE for over 50 years

[Log in to Reply] [No Email]

James Hanna

07-01-2003 11:55:29

Report to Moderator

Re: Re: Re: Re: Re: Homelite SX-135 Bandit Weedeat in reply to BillW, 04-28-2003 20:06:53

Trying to find a MUFFLER For Homelife SX-135 ???Jim

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy