|Stationary Engines Discussion Forum|
Re: Clutch Kit for IH Power Unit H-4284
[Show Entire Topic]
[Show Entire Topic]
[Return to Forum]
[Log in to Reply]
Quoting Removed, click Modern View to see
Looks very similar to the C123 power unit on the old 163 windrowers and the C153 power units on the 230? windrowers.
So you have a flywheel with a flexplate bolted to it that has splines in the center like a clutch disc.
You would need a lined disc and a pressure plate that would bolt to the flywheel, and possibly to machine the flywheel or find one made for a clutch.
Do you need and "overcenter clutch", or just a simple clutch that released when the throwout bearing is depressing the fingers?
Are there holes in the cast iron cover housing for a cross shaft to operate a throwout fork?
I have no idea what IH applications there may have been for that engine as a power unit with a clutch.
If you have and "industrial clutch and brake" outfit in your area that still has an 'ol guy working, he might have some ideas as to a TwinDisc or "Rockford" industrial clutch that might fit, or you could peruse the 'net and see if anything comes up under those names as old and small as what you need.
Maybe and older guy at an irrigation and industrial engine place, as well.
|Fast Shipping! Most of our stocked parts ship within 24 hours (M-Th). We have the parts you need to repair your tractor - the right parts. Our fast shipping, low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]|
| Copyright © 1997-2019 Yesterday's Tractor Co.|
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy