4020 side emblems

Nefarmranch

New User
I'm trying to repair some original 4020
side emblems. One had a few studs broke
off. Are there any tips or tricks for
repairing these broken studs?

This post was edited by Nefarmranch on 10/08/2023 at 11:22 am.
 
mvphoto110570.jpg


mvphoto110571.jpg
 
My 71 has several broken studs. I drilled a hole in the molding at the stud location and used a #6 machine screw and nylock nut. Only the most an@l of the correct police would notice or care. YMMV.
 
I had a couple broke off of my 4020 and I used JB weld on them. Make sure the surfaces are clean and I roughed them up with some really coarse sandpaper so that the JB weld had something to bite. I have had them on for 6 months and so far so good.
 
Find someone with a stud welder, that's how it was done originally. I did a few for myself and took some in for a friend's at the same time.
Never know they were replaced, 0 wharpage. Some welding supply/sales shops may rent them.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top