Can anyone tell me where I can get the
dust shield for an Auto Lite distributer?
Happens to be on a Massey Harris 44-6
(Continental F226), but looking through
the agcopartsbooks.com, it appears that
the shield was used on many Auto Lite
distributer. The real problem I am having
is I can't get the rotor aligned with the
cap to time the darn thing. Rotor always
ends up in the center of two contacts, so
it would be extremely advanced or
retarded. Distributer is driven off oil
pump gear and has not been touched, so I
don't see what could be the issue. At a
loss here.
dust shield for an Auto Lite distributer?
Happens to be on a Massey Harris 44-6
(Continental F226), but looking through
the agcopartsbooks.com, it appears that
the shield was used on many Auto Lite
distributer. The real problem I am having
is I can't get the rotor aligned with the
cap to time the darn thing. Rotor always
ends up in the center of two contacts, so
it would be extremely advanced or
retarded. Distributer is driven off oil
pump gear and has not been touched, so I
don't see what could be the issue. At a
loss here.