allaboardwoods
New User
New to me a 61 4010. Diesel PTO is free to turn either from back or front. but doesn't want to turn with the Lever on the left side of stearing wheel. I got the operation Manuel off line but there is really nothing that addresses trouble shooting the pto.
First tractor at age 56 so am ready for a short life with lots of learning. I have looked through posts but never came across one that would help me diagnose if this is major or minor. Did find a youtube post where somone was working on a 4020 with a similar problem, it turned out to be a broken shaft pin. I dont have any PTO needs currently but would like to have things working if I can do so at a reasonable price. The tractor starts shifts into all gears, stops and the 3 point lifts and lowers using the lever on the right of seat. The rock arm lever (s) seem to have no direct effect on anything.
Thanks for any directions
First tractor at age 56 so am ready for a short life with lots of learning. I have looked through posts but never came across one that would help me diagnose if this is major or minor. Did find a youtube post where somone was working on a 4020 with a similar problem, it turned out to be a broken shaft pin. I dont have any PTO needs currently but would like to have things working if I can do so at a reasonable price. The tractor starts shifts into all gears, stops and the 3 point lifts and lowers using the lever on the right of seat. The rock arm lever (s) seem to have no direct effect on anything.
Thanks for any directions