(800) 853-2651
SHOP NOW

Farmall M stroker kit....Who makes them?

F

Farmallhm44

Member
I looking for a stroker kit for a Farmall M. Who makes them now? I'd rather not deal with Denny's. I talked to Murphys, they don't as of right now. Gary Baker retired. Who else is out there?

This post was edited by Farmallhm44 on 07/19/2022 at 02:45 am.
 
Farmallhm44 I took a crank to Tulsa a few months to have stroked to 7. Haven't heard anything from them. Got a Super block and maybe could get pistons, cam and rods from Murphy sometime. Lynard
 
Farmallhm44 I use a machine shop in Tulsa. Midwestern Engine and Machine. They have done 4 crankshafts over the years for me. Crank grinder is good and stays busy. He gets pallets of BMW cranks to do. I left my crank there and he said he would start welding on it but haven't heard from him. Go up there some time and see what he says. Lynn
 
Crank machine at New Baden Il. Can stroke
your crank or make a billet one. Also can
Cnc rods. But you need to know what you
want. But I saw a M block there a couple
of yrs ago. He did do mine when he said would.
 
(quoted from post at 12:04:00 07/25/22) Crank machine at New Baden Il. Can stroke
your crank or make a billet one. Also can
Cnc rods. But you need to know what you
want. But I saw a M block there a couple
of yrs ago. He did do mine when he said would.
Click to expand...

Thanks
 
Mike Haag builds strokers, also look on
Facebook a guy named willy haan has a
setup for sale right now, 6x4.385.
I had mine done by allshaft repair a few
years (12) ago not sure if they still do
them. I believe lussetto machine will
stroke a crank too
 
(quoted from post at 08:48:34 08/24/22) Mike Haag builds strokers, also look on
Facebook a guy named willy haan has a
setup for sale right now, 6x4.385.
I had mine done by allshaft repair a few
years (12) ago not sure if they still do
them. I believe lussetto machine will
stroke a crank too
Click to expand...

Thank you!
 
You must log in or register to reply here.

Similar threads

F
Farmall M stroker kit....Who makes them?
Replies
0
Views
446
Farmallhm44
F
F
Who else works on governors for a Farmall M puller?
Replies
12
Views
10K
Farmallhm44
F
G
1950 Farmall M Problems
Replies
12
Views
875
redforlife
R
S
M Farmall
Replies
16
Views
1K
dhermesc
D
B
6000 turbo kit
Replies
14
Views
1K
RBnSC
RBnSC
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top