billonthefarm
Member
- Location
- Farmington IL
1066 "farm stock"
- Thread starter billonthefarm
- Start date
Nice looking tractor...Is it DT 466 powered? What weight classes do you pull and is there a speed limit?What kind of horsepower does it take?
Not wanting to hijack your thread but heres a puller that I picked up last week for a very reasonable price just 6 miles from home..Its a 570 cubic inch Pro Field puller that was parked in 2014 with a burnt piston and liner.....See 2nd picture where the first piston is missing the top 1/2 inch...May try the MSTPA 9500 Pro Field class a few times in 2019 knowing that I'm 200-300 horses short....I'll probably turn it in to a 10,500 Hot Stock at 12.5 MPH which will be more affordable..I'll have to find a 16 MPH gear and go to uncut 20.8x38's..
The bottom picture is the "Smoking Swisher's" 9500 Pro Field IH from Reading,KS that won 12 hooks with MSTPA in 2018....Two young brothers (Ty and Dallas Swisher) take turns driving it and they are both good..It has to be in the 1200-1300 horse range..A friend has 1060 horses and is hunting more to be able to run with them..Hes putting on a better head for 2019..
Not wanting to hijack your thread but heres a puller that I picked up last week for a very reasonable price just 6 miles from home..Its a 570 cubic inch Pro Field puller that was parked in 2014 with a burnt piston and liner.....See 2nd picture where the first piston is missing the top 1/2 inch...May try the MSTPA 9500 Pro Field class a few times in 2019 knowing that I'm 200-300 horses short....I'll probably turn it in to a 10,500 Hot Stock at 12.5 MPH which will be more affordable..I'll have to find a 16 MPH gear and go to uncut 20.8x38's..
The bottom picture is the "Smoking Swisher's" 9500 Pro Field IH from Reading,KS that won 12 hooks with MSTPA in 2018....Two young brothers (Ty and Dallas Swisher) take turns driving it and they are both good..It has to be in the 1200-1300 horse range..A friend has 1060 horses and is hunting more to be able to run with them..Hes putting on a better head for 2019..
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy