March 13,2010

Anonymous-0 · Feb 12, 2010

First Annual Indoor Antique Classic sponsored by the Darke County Tractor Pullers. Classes from 3500 up to 8500, non cut tires 3 mph and top cut tires 4 mph, 6500 and below 15.5 tires, 7000 and over 18.4 tires, 25.00 entry fee with a 50% payback, 5000 and 7000 jackpot classes, top cut tires, 6 mph. Pull will be held at Preble county fairgrounds in eaton ohio. Weigh in at 8:00 am pull starts at 9:00 am. Contact Dwight Harris 937-533-2047, Lloyd Lee 937-336-2025 or Joe Singer 937-459-0376

WTW · Feb 12, 2010

I would sure like to come to Eaton but don't have tires to meet your rules. There is no such thing as top cut only tire classes here in Eastern Iowa. There either cut or not cut. Guess I would have to cut me some different tires but don't have the time to do that right now. Guess I will have to wait one more week for Sigourney. Your pulling classes should draw allot of different size tractors. Let us know if you decide to allow all cut tires. Thanks, DW

perrycountyfarmalls · Feb 12, 2010

rules sound great, can't wait to try out my new one!

NCWC · Feb 12, 2010

Looks great! I like the white makes it look like a 460 560 .. I see the engine covers standing up there on the table behind it. Put em on it!

NCWC · Feb 12, 2010

No wait thats a cabinet .. I had to looked again, that would look good on the sides! lol

perrycountyfarmalls · Feb 12, 2010

never thought of that...it would look pretty cool

i wanted a little different, but not too crazy.

thanks

4010 puller · Feb 12, 2010

It looks as if there is no division 1 or 2 classes at dekalb. There is always tallmadge the weekend of March 13. If you have to, borrow a set of tires/wheels from someone in your area that are not cut. I've been working on that tractor of mine, about to start fabricating a few things for linkages and turbo fitment. Head and fuel pump are on. That fender you sent me was great, better than described. The only other thing I might have to eventually do is set up the clutch as described by you in a previous post about using jd parts to make a 4 or 5 disk clutch. What is safe hydraulic pressure I can put on clutch without blowing up 2 speed or oil filter housing? I've heard anywhere between 185-250 psi.

Thanks

Anonymous-0 · Feb 12, 2010

I come to your pull and get lots of firsty!

Anonymous-0 · Feb 13, 2010

Stupid Idiot. ChadS

Anonymous-0 · Feb 13, 2010

Nice Tractor.... What Div will you pull?

Thanks, Mike

perrycountyfarmalls · Feb 14, 2010

div II, or 3mph non cuts.

thanks

Mike Hawkey · Feb 14, 2010

perrycountyfarmalls

can I get some more pictures of the wheelie bars and hitch I am trying to get ideas for when I do mine

perrycountyfarmalls · Feb 14, 2010

the wheelie bars are the denny's style, and the hitch looks similar to the one on ytmag, in the parts and pieces photos. i think it is under a farmall h. i'll try to get pics soon.

Anonymous-0 · Feb 15, 2010

very nice tractor love the colors would you happen to have any more pics of it I really like your two middle bars and your seat stand

perrycountyfarmalls · Feb 15, 2010

no new pics yet...its still stuffed in the shop..a little too much snow outside here in central ohio...

Pullerboy624 · Feb 15, 2010

they are have div to none cut at eaton. then a top cut class and a full cut class.

March 13,2010

Anonymous-0

Well-known Member

WTW

Well-known Member

perrycountyfarmalls

Member

NCWC

Member

NCWC

Member

perrycountyfarmalls

Member

4010 puller

Well-known Member

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

perrycountyfarmalls

Member

Mike Hawkey

New User

perrycountyfarmalls

Member

Anonymous-0

Well-known Member

perrycountyfarmalls

Member

Pullerboy624

Member

Similar threads