New Holland 68

bulletsnbait · Feb 20, 2020

I'm looking for either decals, stencils, pictures of the decals with approximate height and length measurements, and 360 pics of a PTO- driven Hayliner 68 square baler. Any advice?

showcrop · Feb 21, 2020

If you supply the pics and exterior dimensions any sign shop can make them for you.

Stephen Newell · Feb 21, 2020

What I did on my tractor is guess at the dimensions and print pictures of the decals on plain computer paper and then I cut the lettering with an exacto knife and used that for a stencil. I applied the stencil
to the metal with a light coat of spray adhesive. Of course it wasn't any small lettering but you can't tell it's not a decal.

Bill M. From Illinois · Mar 7, 2020

There is none available that I could find but for around $100 I had some vinyl decals made by a sign shop. He pulled photos off the net to reproduce them and turned out very good.

showcrop · Mar 7, 2020

(quoted from post at 19:15:03 03/07/20) There is none available that I could find but for around $100 I had some vinyl decals made by a sign shop. He pulled photos off the net to reproduce them and turned out very good.

Sounds good. That is the way most signs and lettering are done now.

New Holland 68

bulletsnbait

Member

showcrop

Well-known Member

Stephen Newell

Well-known Member

Bill M. From Illinois

Member

showcrop

Well-known Member

Similar threads