d13series1
Member
Sooo. got an odd ball question. Allis B. 20 years ago I started a 'resto-mod' on this, it took me 3 tractors to find enough high quality parts. Think polished stainless button heads for all non-structural bolts... As an example I had the finals hot tanked, then I blasted them, all new bearinga and seals, then primed with Rustoleum, and shot them with enamel with hardener. Trans similar without the hot tank, etc. All the 'small' bits like steering gear were Rustoleum black, no hardener.
Well, life happened.
Now I have a 3/4 painted tractor. I can no longer get mathcing paint and the original can is set up.
Plan is to fnish cleaning up the remaining parts, scuff all the big parts, and shoot everything in black primer. I will then topcoat the 'big' pieces with auto grade single stage and do the 'details' in black.
WIll I be OK? the last paint was put on this 10+ years ago..
Well, life happened.
Now I have a 3/4 painted tractor. I can no longer get mathcing paint and the original can is set up.
Plan is to fnish cleaning up the remaining parts, scuff all the big parts, and shoot everything in black primer. I will then topcoat the 'big' pieces with auto grade single stage and do the 'details' in black.
WIll I be OK? the last paint was put on this 10+ years ago..